Kyrtica EOOD (Къртица ЕООД) – demolition, clean-up and removal

Price list

Prices

All prices are in euro and exclude VAT. Cutting, chemical compounds and difficult cases are agreed for each site.

Drilling calculator

Pick the diameter and the depth of the hole: the price follows the table below – the price up to 200 mm plus the addition for every further 10 mm.

All 19 diameters of the price list, to one scale: the largest ring is Ø 800 mm.
Diameter of the hole, mm

Minimum charge for a job in the Sofia area: €150.00. Deeper than 1000 mm: ask us.

Notes

  • The price of a hole is calculated on its full depth, not only on the concrete.
  • Minimum charge for a job in the Sofia area: €150.00.
  • For sites without a lift, or where it cannot be used, carrying the equipment up is charged – by agreement.
  • The core drilling prices are for holes up to 2.50 m high and up to 1000 mm deep (deeper: ask us), in normally reinforced concrete – up to 40 kg/m² of bars up to N18. They do not include cleaning up the concrete debris and slurry.
  • Drilling heavily reinforced concrete, lintels, columns, diaphragm walls, piles, drilling at an angle and other complications – by agreement.
  • Work in low, deep, narrow, hard-to-reach, extreme and other conditions – by agreement.
  • The prices for fitting debris chutes assume a perfect plumb line.
  • By ordering diamond cutting or drilling, the client confirms knowing what the work involves: water cooling, a risk of disturbing the reinforcement of the building and the load-bearing capacity of the structure, of damaging services and pipes built into walls or floors, and so on. Anchors or plugs stay in the floor or the walls. Water comes out around the hole.
  • The client confirms knowing what the ordered work involves and these notes.
  • All prices exclude VAT.

1. Diamond cutting

ServicePrice
Diamond cutting with a floor sawby agreement
Diamond cutting of concrete with a bladeby agreement
Diamond cutting of concrete with a wire sawby agreement

2. Diamond core drilling

DiameterHole in concrete up to 200 mmEach further 10 mm
Ø 52€20.00+ €1.00
Ø 62€20.00+ €1.00
Ø 82€20.00+ €1.00
Ø 102€20.00+ €1.00
Ø 112€20.00+ €1.00
Ø 122€25.00+ €1.25
Ø 132€25.00+ €1.25
Ø 152€30.00+ €1.50
Ø 182€35.00+ €1.75
Ø 202€40.00+ €2.00
Ø 250€50.00+ €2.50
Ø 300€60.00+ €3.00
Ø 350€70.00+ €3.50
Ø 400€90.00+ €4.50
Ø 450€120.00+ €6.00
Ø 500€140.00+ €7.00
Ø 600€200.00+ €10.00
Ø 700€300.00+ €15.00
Ø 800€400.00+ €20.00

Diameters in millimetres. Deeper than 200 mm, the amount for each further 10 mm is added to the price.

3. Injecting chemical compounds

ServicePrice
Injecting a chemical anchorby agreement
Breaking rock with a chemical wedgeby agreement

4. Scanning

ServicePrice
Scanning concrete, masonry and plasterboard€100.00/h

5. Strengthening openings

ServicePrice
Strengthening openings with steel and/or carbon systemsby agreement

A hole, a cut or a rock to break?

Call us or write: tell us the material, the thickness and the size of the opening.

Privacy